United States


support for

Helix X4 Stunt

get started
& how to

contact us


Mon - Fri

11am - 7pm EST

get started
& how to

Helix X4 Stunt - Getting Started

You will need:

  • 1 x Helix X4 Stunt
  • 1 x Remote Control
  • 8 x AA Premium Alkaline Non-Rechargeable Batteries (not included)
  • 1 x Phillips Screwdriver (not included)

Install the batteries. Open the battery compartment on the back of your controller using a Phillips head screwdriver. Place the 8 AA batteries in the battery compartment, making sure you are putting these in the right way.

Charge your helicopter. The charging wire is located at the bottom of the controller. Take this and plug it into the Helix X4 Stunt, move the power switch on the controller into either the Novice or Expert position, and you will see a solid red light on the controller. The Helix X4 is now charging. When the green and red lights are on together, your Helix X4 will be ready to fly.

Check your environment. The Helix X4 Stunt is recommended for indoor use for the best results. Before flying, make sure you are indoors, away from any other Infrared devices, bright lights, air vents or open windows.

Turn the Helix X4 Stunt and the controller on. Have fun.

was this answer helpful? yes > no >

back to top

general info

How do I install batteries in my Helix X4 Stunt Controller?

You will need: (not included with your Helix X4 Stunt)

  • 1 x Phillips Screwdriver
  • 8 x AA New Premium Alkaline Non-Rechargeable Batteries of the same brand.
  • 1 x Helix X4 Stunt
  • 1 x Helix X4 Stunt Remote Control/Charger

Installing the Batteries
  1. Open the battery door cover using your Phillips Screwdriver.
  2. Remove any used batteries from your remote control.
  3. Put in your new batteries as shown in the battery compartment of your remote.
  4. Using the Phillips Screwdriver, screw in the battery door cover back onto the remote control.
  5. was this answer helpful? yes > no >

    Where can I fly my Helix X4 Stunt?

    Your Helix X4 Stunt is designed to be flown indoors. Due to the high performance of the Helix, the room you are in should have lots of space to fly with no breakable objects. Turn off any ceiling fans and stay away from any other air vents to ensure a successful flight.

    We don’t recommend flying the Helix outdoors as it is a very finely tuned Stunt Quad Copter and the performance could potentially be affected by environmental conditions.

    Follow these tips and you will be an expert pilot in no time!

    was this answer helpful? yes > no >

    How long should it take for my Helix X4 Stunt to take a charge?

    Your Helix X4 Stunt will take around 40 to 60 minutes to charge. You will know when it is fully charged because the red and green lights on your controller will be on together, or the red light on the USB will go out.

    was this answer helpful? yes > no >

    Can I fly more than one Helix X4 Stunt at a time?

    Your Helix X4 Stunt uses an ‘auto-pairing’ technology, meaning you can use multiple units together at any one time! Simply pair each Helix to the respective controller by following the pairing directions in the Manual!

    was this answer helpful? yes > no >

    How long will my Helix X4 Stunt fly for?

    The average flight time for your Helix X4 stunt is around 5 to 7 minutes on a full charge. The flight time may vary depending on where you’re flying it, the type of batteries you are using, and how much throttle you give the helicopter!

    was this answer helpful? yes > no >

    How do I pair my Helix X4 Stunt to my controller?

    To pair your Helix X4 Stunt to it's controller, follow these steps:

    1. Turn on your Helix X4 Stunt and place it on a flat, stable surface.
    2. Switch your controller to the Novice (1 Arrow) or Expert (2 Arrow) position. Make sure the throttle is pushed all the way down.
    3. Your Helix X4 Stunt will initially have a solid orange LED which will change color and blink while pairing with the controller.
      • If the controller is set into Novice Mode, the light on the Helix will be green.
      • If the controller is set to Expert Mode, the light on the Helix will be red.
    4. When the throttle is engaged, the lights on both the controller and the Helix X4 Stunt will go solid. You are now ready to fly!
    5. was this answer helpful? yes > no >

      How do I charge my Helix X4 Stunt using the controller?

      While we recommend charging your Helix X4 Stunt using the included USB cable, it is possible to charge the unit using your controller too.

      What you need:

      • 1 x Helix X4 Stunt
      • 1 x Helix X4 Stunt remote/charger with batteries already installed.

      1. Remove the charging cable from the bottom of the remote control, just below the cord management dial.
      2. Make sure that both the remote control and the Helix X4 Stunt are turned to the "OFF" position.
      3. Plug in the end of the charging wire into the charge port square on the top of the Helix X4 Stunt.
      4. Once plugged in, turn the power switch on the remote control to either the Novice (1 arrow) or Expert (2 arrow) position. You will know that the Helix is charging when you see the Red charging light on the remote.
      5. When your Helix X4 Stunt is fully charged, both the Red charge light and Green power light will be on together. Once complete, turn everything off and unplug and store the cord back in the remote using the cord management dial.

      You are now ready to fly!

      was this answer helpful? yes > no >

      What more can you tell me about my Helix X4 Stunt?

      Helix X4 Stunt™

      Black & Red

      Indoor Recommended

      Control Interface:

      2.4 GHz

      Battery Requirement for Helix X4 Stunt™:
      Rating: DC 3.7 V, 1.8 W, 450mAh LiPo
      Batteries: 1 x 3.7 V, 1.8 W Li-Poly Rechargeable Battery Pack
      Requires: 1 x 3.7 V Li-Poly Rechargeable Battery Pack (included)

      Battery Requirement for Controller/Charger:
      Rating: DC 12 V, 0,45 W
      Batteries: 8 x 1.5 V "AA"/LR6/AM3
      Requires: 8 x 1.5 V "AA" size batteries (not included)

      Charge Time:
      Approx. 45 mins.

      Flight Time:
      5-7 mins.

      was this answer helpful? yes > no >

      How do I charge my Helix X4 Stunt using the USB cable?

      What you need:

      • 1 x Helix X4 Stunt
      • 1 x USB Cable (included)
      • A Computer

      1. Make sure that the Computer you are using is turned on and has working USB ports. Turn the switch on the Helix X4 Stunt to the Off / Charge position (The O / lightning bolt)
      2. Take the USB cable and plug in the larger end into a USB port on the computer.
      3. Plug the smaller end of the USB cable into the square charge port on the top of the Helix X4 Stunt.
      4. The LED on the USB cable will be solid red.
      5. When charge is complete, the red light on the USB cable will shut off. Unplug and store away the cable.
      You are now ready to fly!

      was this answer helpful? yes > no >

      What do the controller / Helix X4 Stunt lights mean?

      Here are the different types of lights you may get on your remote control or Helix X4 Stunt and what they mean:


      • Flashing Green - Unlinked (looking for Helix X4 Stunt)
      • Flashing Red & Green (Together) - Unlinked & Low Batteries
      • Flashing Red & Green (Alternating) - Charging Error
      • Flashing Red (while Charging) - Low Batteries
      • Solid Green - Controller On & Linked to Helix X4 Stunt
      • Solid Red - Charging
      • Solid Red & Green - Fully Charged
      • Solid Green, Flashing Red - Linked & Low Batteries

      Helix X4 Stunt

      • Flashing Green - Unlinked / Linking (Novice Mode)
      • Flashing Red - Unlinked / Linking (Expert Mode)
      • Flashing Orange - Low Batteries
      • Solid Orange - Calibrating
      • Solid Green - Linked (Novice Mode)
      • Solid Red - Linked (Expert Mode)
      Are you seeing different lights that aren’t on this list? If so, call our Customer Care Department at 1-800-622-8339. They’d love to help!

      was this answer helpful? yes > no >

      Helix X4 Stunt - Novice vs Expert Modes: The Differences

      Your Helix X4 Stunt has 2 operational modes; Novice and Expert. You are able to switch between modes using the Power Switch at the top of the remote control.

      Novice Mode (1 Arrow)
      When your Helix X4 Stunt is in Novice Mode, the lights on the unit will be green. Just because you’re flying in Novice Mode, doesn’t mean you’re a beginner! Flying in Novice Mode is a great way to get to know your Helix and will give you a more complete and thorough understanding of the controls.

      While stunts can be performed in Novice, we recommend perfecting the art of flight in this mode before switching to Expert Mode to perform stunts.

      Expert Mode (2 Arrows)
      When your Helix X4 Stunt is in Expert Mode, the lights on the Copter will be red. Expert Mode is for the experienced pilot who is looking to perform high-octane stunts and explore the full capabilities of the Helix X4 Stunt! You will find that your Helix responds to your commands to a greater degree, allowing you to recover from stunts with ease.

      Flying in Expert Mode allows you to achieve the maximum amount of control possible with your Helix X4 Stunt.

      was this answer helpful? yes > no >

      How do I perform stunts with my Helix X4 Stunt?

      The Helix X4 Stunt has 3 different stunts you are able to perform at the simple touch of a button. On the lower right side of the front of the controller, you will see a large red button and above that, a red switch. These are your stunt controls. The red switch selects which stunt you will be performing, and the large red button activates this stunt.

      The stunts are as follows:

      • Position 1 - Flip

      • Position 2 - Barrel Roll

      • Position 3 - 180° Flip

      We always recommend performing stunts in Expert Mode as the Helix will respond to your commands to a greater degree. A stunt isn’t truly complete without a successful return to normal flight, which is made easier when in Expert Mode due to the increased level of control.

      Before you start performing stunts, find an area free from any obstruction or breakable objects. The higher up your Helix is when you perform stunts the more space you will have to recover; the unit may lose altitude after a stunt is completed.

      To ensure the best chance of successfully completing your stunts, gradually increase the throttle and when you’re ready to perform the maneuver, press and hold the stunt button for a few seconds while maintaining throttle throughout the entire stunt.

      While the Helix is designed to perform amazing stunts with relative ease, they are not automatic and do require some practice! We encourage you to experiment with different levels of throttle going in and coming out of the stunts and eventually, you will be a master of the Helix X4 Stunt.

      was this answer helpful? yes > no >

back to top

troubleshooting & repair

Are there replacement parts available for my Helix X4 Stunt?

While replacement parts may not be available, we would love to see if there is anything we can do for you. Give our Customer Care Department a call at 1-800-622-8339 and they will be glad to help you out!

was this answer helpful? yes > no >

back to top